ARB Summit MKII Rear Step Tow Bar Isuzu D-max '21

ARB5648010

ARB Summit MKII Rear Step Tow Bar Isuzu D-max '21
Velg type
Velg komponenter
28.240,-
22.592,-eks. mva
Legg i handlekurv
bestillingsvare: levering fra oss om ca 45 virkedager.
    Spesifikasjoner
    ProdusentARB
    Passer til
    ISUZU D-MAX

    FEATURES & BENEFITS

    • Vehicle specific design suitable for the MY21 Isuzu D-MAX dual cab with tub
    • Durable steel construction for maximum protection
    • Rear Step Tow Bar structure manufactured from:o 3mm laser cut and folded sheet metal o 100x50x6mm 350 grade cross member o 6mm 350 grade chassis plates
    • Retains OE license plate lights
    • Compatible with OE rear parking sensors
    • Compatible with RCTA (Rear Cross Traffic Alert System)
    • Compatible with OE trailer wiring or ARB trailer wiring, plug n play loom supplied with 7 pin flat
    • Provision for 50amp Anderson plug, ARB Trailer Camera Kit and ARB Air Compressor outlet
    • Twin ARB Jack or Hi-Lift Jack points located in the Rear Step Tow Bar
    • Anodised aluminium top tread plate
    • 3.5T class 4 tow hitch
    • Optional Lower Protection Tube Kit (PN 5748010)
    • Bar adds approximately 20mm (excluding towbar tongue) to the overall length of the vehicle
    • Approximate weight of the bar, chassis mounts and fitting kit is 51kg
    • Approximately 16kg is removed from the vehicle for fitment of the bar, and an additional 34kg If vehicle Is fitted with OE towbar
    • Approximate weight of optional Lower Protection Tube Kit PN 5748010 is 17.5kg
    • Metaprep primer applied for additional corrosion resistance
    • Finished in matt black powder coat
    OPTIONAL LOWER PROTECTION TUBE KIT
    For added protection to the lower edges of the vehicle tub, a Lower Protection Tube Kit with recovery points has been developed (PN 5748010).
    TUBE KIT KEY FEATURES:
    • Developed to fit MY21 Isuzu D-MAX fitted with ARB Rear Step Tow Bar PN 5648010
    • Chassis plate is manufactured from 6mm laser cut sheet steel with a 4mm laser cut and folded support bracket to the 60.3mm tube work
    • Metaprep primer for additional corrosion resistance
    • Finished in matt black powder coat

    REAR PARKING SENSORS
    Laser cut provision is provided in the ARB Summit MKII Rear Step Tow Bar for the original equipment front parking sensors. OE parking sensors have been mapped
    and their performance closely replicated when fitted to the ARB Rear Step Tow Bar. The outer rear facing parking sensors are located approximately 20mm inboard and
    upwards by 88mm, inner sensors are located approximately 74mm upwards, 33mm outboard and 33mm rearward compared to the OE condition. Radars have been moved upwards by 20mm and outboard by 25mm When fitted with larger diameter tyres these parking sensor positions and hence range may also be affected. Further real-world testing has been conducted evaluating the operation of the sensors against such items as rubbish bins, parking bollards, wire fences, large rocks and step driveway entrances. Test results show that sensor performance is replicated as close as practical with the change in height of the sensors location. Painting of parking sensors is not recommended due to the potential unknown effect on the operation of the sensors.

    JACK POINTS
    Two ARB Jack or Hi-Lift jack points are located in the lower section of the bar.
    • Vehicle specific design suitable for the MY21 Isuzu D-MAX dual cab with tub
    • Durable steel construction for maximum protection
    • Rear Step Tow Bar structure manufactured from:o 3mm laser cut and folded sheet metal o 100x50x6mm 350 grade cross member o 6mm 350 grade chassis plates
    • Retains OE license plate lights
    • Compatible with OE rear parking sensors
    • Compatible with RCTA (Rear Cross Traffic Alert System)
    • Compatible with OE trailer wiring or ARB trailer wiring, plug n play loom supplied with 7 pin flat
    • Provision for 50amp Anderson plug, ARB Trailer Camera Kit and ARB Air Compressor outlet
    • Twin ARB Jack or Hi-Lift Jack points located in the Rear Step Tow Bar
    • Anodised aluminium top tread plate
    • 3.5T class 4 tow hitch
    • Optional Lower Protection Tube Kit (PN 5748010)
    • Bar adds approximately 20mm (excluding towbar tongue) to the overall length of the vehicle
    • Approximate weight of the bar, chassis mounts and fitting kit is 51kg
    • Approximately 16kg is removed from the vehicle for fitment of the bar, and an additional 34kg If vehicle Is fitted with OE towbar
    • Approximate weight of optional Lower Protection Tube Kit PN 5748010 is 17.5kg
    • Metaprep primer applied for additional corrosion resistance
    • Finished in matt black powder coat
    OPTIONAL LOWER PROTECTION TUBE KIT
    For added protection to the lower edges of the vehicle tub, a Lower Protection Tube Kit with recovery points has been developed (PN 5748010).
    TUBE KIT KEY FEATURES:
    • Developed to fit MY21 Isuzu D-MAX fitted with ARB Rear Step Tow Bar PN 5648010
    • Chassis plate is manufactured from 6mm laser cut sheet steel with a 4mm laser cut and folded support bracket to the 60.3mm tube work
    • Metaprep primer for additional corrosion resistance
    • Finished in matt black powder coat

    REAR PARKING SENSORS
    Laser cut provision is provided in the ARB Summit MKII Rear Step Tow Bar for the original equipment front parking sensors. OE parking sensors have been mapped
    and their performance closely replicated when fitted to the ARB Rear Step Tow Bar. The outer rear facing parking sensors are located approximately 20mm inboard and
    upwards by 88mm, inner sensors are located approximately 74mm upwards, 33mm outboard and 33mm rearward compared to the OE condition. Radars have been moved upwards by 20mm and outboard by 25mm When fitted with larger diameter tyres these parking sensor positions and hence range may also be affected. Further real-world testing has been conducted evaluating the operation of the sensors against such items as rubbish bins, parking bollards, wire fences, large rocks and step driveway entrances. Test results show that sensor performance is replicated as close as practical with the change in height of the sensors location. Painting of parking sensors is not recommended due to the potential unknown effect on the operation of the sensors.

    JACK POINTS
    Two ARB Jack or Hi-Lift jack points are located in the lower section of the bar.

    Les mer